OAK
The HORL® 2 is the latest technological benchmark of the HORL® Sharpener family. Two grinding angles and exchangeable grinding discs ensure more flexibility. A completely new, backlash-free rolling feeling is created by the press assembly and the built-in ball bearings. The ceramic coating on the honing side guarantees impressive grinding results.
This sharper includes:
- HORL Diamond Standard
- Ceramic honing disc
- Grinding angle 15° / 20°
- Changeable grinding discs
£159.00
Out of stock
Email when stock available
EX Works
Finish
This microscopic comparison shows a factory finish on a knife.
Finish
This microscopic comparison shows the finish using a HORL2; they are comparable.
20° GRINDING ANGLE
FOR A STABLE SHARPNESS
Use the 20° grinding angle to build a sharp edge on your European knives. The 20° angle is suited to these knives and will give a lasting sharp edge.
15° GRINDING ANGLE
FOR PRECISE SHARPNESS
Japanese, and exceptionally fine blades of Damascus, or high-quality carbon steel, will benefit from the 15° grinding angle. These blades are manufactured from much harder steel, holding their sharp edge much longer than a standard steel knife would ground to this finer angle.
Diamond
Grinding Disk
The industrial diamonds we use are suitable for efficiently sharpening all knife steels of any degree of hardness without water. When used properly, the HORL® Diamond Standard never needs to be replaced. The grain size of 46 μm grinds efficiently and precisely. A high-quality sharpening result is achieved in just a short time.
Ceramic
Honing Disk
After processing with the HORL® Diamond Standard, the ceramic honing disc significantly refines the grinding result. Only a few movements are needed for this. The result is a smooth, clean and filigranely sharpened knife edge.
Diamond
Grinding
Industrial diamonds are considered one of the most durable and effective abrasives on the market. The monocrystalline diamonds are harder than any knife steel. By using a galvanic process, the diamonds in the HORL® Diamond Standard are fixed to approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface will become finer and the HORL® Diamond Standard reaches its ideal grinding surface.
S-PAD
Magnetic Knife Holder
The combination of strong neodymium magnets and the HORL® S-Pad ensures that the knife is securely fixed during sharpening. Reinforced by the anti-slip effect of the S-Pad, even small blades can be sharpened consistently and reproducibly at the desired height.
Additional information
| Weight | .82 kg |
|---|---|
| Dimensions | 13.3 × 12 × 7 cm |
Matt –
Wow it’s impressive vs the mino sharp sharpener for my globals. After a good decade of sharpening with that and a Lansky, they are clearly due a good profiling.
Done the large chefs knife first and blown away.