OAK
The HORL® 3 is the latest technological benchmark of the HORL® Sharpener family. The HORL3 Oak has two grinding angles and exchangeable grinding discs, which allow you to grind your knife to perfection. The backlash-free rolling feeling is created by the press assembly and the built-in ball bearings. The new HORL® Grip Pad is developed for even stronger power to affix the smallest knives to the angle support. The HORL® discs are made from block diamonds to be even more abrasive to ensure fast grinding and uniform grinding pattern.
This sharpener includes:
- HORL diamond disc
- Ceramic honing disc
- Magnetic Angle Support for grinding angle 15° / 20°
£169.00
In stock
EX Works
Finish
This microscopic comparison shows a factory finish on a knife.
HORL
Finish
This microscopic comparison shows the finish using a HORL3; they are comparable.
QUICK LOCK
With the new Quick Lock system, changing grinding discs is even easier, simply twist off and exchange the discs for complete flexibility. You can achieve higher levels of sharpness using the accessories.
20° GRINDING ANGLE
FOR A ROBUST SHARPNESS
Use the 20° grinding angle to build a sharp edge on your European knives. The 20° angle is suited to these knives and will give a lasting sharp edge. This angle is also suitable for outdoor and pocket knives.
15° GRINDING ANGLE
FOR FILIGREE SHARPNESS
Japanese, and exceptionally fine blades of Damascus, or high-quality carbon steel, will benefit from the 15° grinding angle. These blades are manufactured from much harder steel, holding their sharp edge much longer than a standard steel knife would ground to this finer angle.Â
DIAMOND
GRINDING DISC
This standand disc is pre-installed on your HORL3. The industrial diamonds we use are suitable for efficiently sharpening all knife steels of any degree of hardness without water. When used properly, the HORL® Diamond Standard never needs to be replaced. The grain size of 46 μm grinds efficiently and precisely. A high-quality sharpening result is achieved in just a short time.
Ceramic
Honing Disc
After processing with the HORL® Diamond Standard, the ceramic honing disc significantly refines the grinding result. Only a few movements are needed for this. The result is a smooth, clean and filigranely sharpened knife edge.
Diamond
Grinding
Industrial diamonds are considered one of the most durable and effective abrasives on the market. The monocrystalline diamonds are harder than any knife steel. By using a galvanic process, the diamonds in the HORL® Diamond Standard are fixed to approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface will become finer and the HORL® Diamond Standard reaches its ideal grinding surface.
GRIP PAD
The HORL® Grip Pad ensures that the knife is securely fixed during sharpening. Using ultra strong magnets and a stable control pad, there is up to 70% more grip with the HORL®3. With improved grip, it’s even better for holding small blades so that they can be sharpened consistently and reproducibly at the desired height.
Additional information
| Weight | .82 kg |
|---|---|
| Dimensions | 13.3 × 12 × 7 cm |
Reviews
There are no reviews yet.